Products
Brick Making Machine in Türkiye
Nianpeng concrete brick-making machines have remarkable advantages. They are highly efficient in production, capable of quickly producing a large number of bricks. The bricks they make are of reliable quality with high strength. They can adapt to a wide range of raw materials, including industrial waste. With a high degree of automation, they reduce manual labor. Moreover, various molds can be customized to produce diverse bricks, suitable for construction, road, and landscaping projects, and after-sales service is also guaranteed.
Features
Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of brick making machine in türkiye in China. If you're going to buy high quality brick making machine in türkiye, welcome to get pricelist and quotation from our factory. For price consultation, contact us.
|
1. Actuator not moving (e.g., pressure head not dropping, mold not opening or closing)
Common causes:
Solenoid reversing valve failure: Coil burnout (voltage instability, overload), valve core sticking (impurity blockage), resulting in oil circuit failure;
Cylinder failure: Piston rod bending (uneven force distribution), damaged seals within the cylinder (causing "internal leakage," short-circuiting the oil inside the cylinder and preventing the piston from moving);
Pipe blockage/breakage: High-pressure pipes break due to vibration or aging, or become clogged with impurities (e.g., brick slag, metal debris), preventing oil from reaching the actuator.
Troubleshooting:
Check the solenoid reversing valve coil for heat and a burning odor. Use a multimeter to test the coil for continuity.
Disassemble the cylinder, inspect the piston rod for deformation, and replace damaged seals (e.g., Y-ring, dust seal).
Inspect the pipelines, clear any blockages, and replace any broken pipes.
2. Slow and uncoordinated movement (e.g., slow feeding, extended molding cycle)
Common causes:
Decreased hydraulic pump efficiency: Wear of pump components (e.g., increased gear clearance in a gear pump), resulting in reduced displacement;
Faulty throttle/speed control valve: Valve core sticking, improper flow regulation, slowing oil flow;
System leaks: External leaks (pipe fittings, seals) or internal leaks (cylinders, hydraulic pumps), resulting in insufficient effective flow.
Troubleshooting:
Check the hydraulic pump outlet pressure and flow rate; replace the pump if wear is severe;
Clean the throttle/speed control valve and readjust the flow rate to the equipment requirements;
Inspect each seal individually, replace any worn seals, and tighten joints.
3. Hydraulic system leaks (serious safety hazards and oil waste)
Leaks are categorized as external (oil leaking outside the equipment) or internal (oil short-circuiting within the system, such as within a cylinder or hydraulic pump). External leaks are easier to detect, while internal leaks require performance evaluation. 1. External Leakage (Common Locations and Causes)
Pipeline Joints: Loose joints (caused by vibration), aging or damage of seals (O-rings, combination gaskets), and worn joint threads.
Hydraulic Valve Interfaces: Deformation and aging of seals between valve blocks and pipelines, such as solenoid reversing valves and relief valves.
Cylinder Piston Rods: Damage to dust seals and piston rod seals, resulting in oil leakage from the gap between the piston rod and the cylinder barrel (often accompanied by oil stains on the piston rod surface).
4. Internal Leakage (Hidden, requiring diagnosis based on symptoms)
Cylinder Internal Leakage: Inability of the pressure head to maintain pressure (e.g., automatic return after compression), dents in the brick after forming.
Hydraulic Pump Internal Leakage: The pump outlet pressure meets the specified value but the flow rate is insufficient. The motor is noisy when running at no load, but becomes louder when loaded.
Leakage Treatment Principles:
External Leakage: Prioritize inspecting the seals and replacing them with high-pressure-resistant seals of the same specification (avoid using standard rubber parts; use hydraulic seals specifically designed for hydraulic applications, such as nitrile rubber or fluororubber). Tighten loose joints, and severely worn joints should be replaced entirely.
Hot Tags: brick making machine in türkiye, China brick making machine in türkiye manufacturers, suppliers, factory, automatic cement brick making machine, Blind brick machine, cement brick machinery, cement brick manufacturing machine, cement brick moulding machine, Slope protection brick machine
You Might Also Like
Send Inquiry
