Small Static Press

Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of small static press in China. If you're going to buy high quality small static press, welcome to get pricelist and quotation from our factory. For price consultation, contact us.

1.200x100x60mm pavement block can be formed 24pcsmold. One set includes
double lower molds and single upper mold.
2. Needs 3 worker to operate, 1 worker for mixing,2 workers for forming(Blocks
can be discharged from two sides), direct palletizing without pallets.
3.Effective molding area: 500x300mm,maximum customized size: 600x600mm

A 150 small isostatic press generally refers to a small isostatic press with a maximum pressure of 150 tons or a working pressure of approximately 150 MPa. It is primarily used for pressing samples in laboratories and other places. The following is an introduction to some related products:

The high-pressure chamber has an effective inner diameter of 150mm and an effective depth of 300mm, with a maximum operating pressure of 300MPa. It utilizes automatic material handling and a hydraulic drive, with precise step-by-step adjustment of pressure increase and decrease speeds. It features a full-color touchscreen interface, and recorded data can be exported via USB. Its dimensions are no larger than 2000×1350×1500mm, the equipment weighs less than 3.75 tons, and its installed power is 9kW.

FAQ:

Q: What types of 150-ton static presses are available?
A: Commonly available are 150-ton electric isostatic presses, such as the JDY-150J from Tianjin Jiaxinhai Machinery Equipment Co., Ltd., which are integrated. There are also 150-ton top-pressure static pile drivers, such as the GZY150D from Huawei Pile Engineering, used for foundation construction. There are also experimental cold isostatic presses, such as the CIP-150MA from Guangdong Kejing Zhida.
Q: How do you operate a 150-ton electric isostatic press?
A: First, place the sample into a rubber mold or a sealed, overmolded sample, place it into the isostatic press chamber, and tighten the screw. Press the "Set" button to enter the setup interface and set parameters such as the upper and lower pressure limits, time, and mold diameter. Press the "Pressure" button to start the machine. When the pressure reaches the set value, it stops and maintains pressure for a timer. If it falls below the set pressure, it automatically replenishes the pressure, and when the timer expires, it automatically releases the pressure. Pressing the "Stop" button during operation will stop the motor and release the pressure via the pressure relief valve.
Q: What are the main parameters of the Huawei Pile GZY150D top-pressure static pile driver?
A: Dimensions are 8000mm long, 7500mm wide, and 2400mm high. The hydraulic system has a rated pressure of 16 MPa. The motor power is 37kW x 2. The maximum driving force is 1500 tf. The maximum driving speed is 4 m/min, and the minimum driving speed is 1.8 m/min. The driving stroke (per stroke) is 1600m, the longitudinal stroke (per stroke) is 1000m, and the lateral stroke (per stroke) is 2500m. The maximum lifting stroke is 900m, and the maximum rotation angle per stroke is 18°.
Q: What are the features of the CIP-150MA laboratory cold isostatic press?
A: It features convenient automatic material lifting and loading, requiring no auxiliary devices. It uses a full-color touchscreen human-machine interface, which is intuitive and convenient. The maximum operating pressure can reach up to 300 MPa, suitable for a wide range of material pressing requirements. The pressure ramp speed can be precisely set in stages, and process parameters can be stored in multiple sets. The entire pressure cycle data is recordable and traceable.
Q: What are the safety precautions when using the 150 isostatic press?
A: Before operation, carefully inspect all components of the cold isostatic press, including the high-pressure vessel, hydraulic system, control system, and seals, to ensure they are in good condition and free of leaks and damage. For electric isostatic tablet presses, avoid touching moving parts while the equipment is running. In the event of an emergency, press the stop button immediately to relieve pressure. Additionally, some isostatic presses are equipped with steel plate guards and plexiglass covers. Ensure these guards are intact and in proper use during operation.

Hot Tags: small static press, China small static press manufacturers, suppliers, factory, AGGREGATE BATCHING MACHINE FABRIC BATCHING MACHINE, automatic hollow block machine, automatic hollow brick machine, Brick-making machine, hollow brick machinery, hollow cement brick machine