Cement Block Making Machine in Brunei

Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of cement block making machine in brunei in China. If you're going to buy high quality cement block making machine in brunei, welcome to get pricelist and quotation from our factory. For price consultation, contact us.

Production Target: Daily/Monthly Production Requirement
First, calculate the target production: Based on market orders or plans, determine the average daily production volume of standard bricks. (Note: The industry typically uses "standard bricks" as the unit of measure. 1 standard brick is ≈ 240mm × 115mm × 53mm. Hollow bricks should be converted by volume, e.g., 1 390mm × 190mm × 190mm hollow brick is ≈ 3.5 standard bricks.)

Matching Equipment Capacity:

If daily production is ≤ 10,000 standard bricks: Prefer semi-automatic machines (e.g., 800-2,000 bricks/hour) to avoid overkilling automatic machines and leaving them idle.

If daily production is ≥ 30,000 standard bricks: Must choose automatic machines (e.g., 3,000-8,000 bricks/hour). Manual bottlenecks in semi-automatic machines can lead to substandard production. Product Positioning: Brick Type, Quality Standards
Brick Type Requirements: Specific brick types (e.g., ordinary hollow bricks, load-bearing hollow bricks, permeable hollow bricks, and building blocks) must be specified. Different equipment has varying mold compatibility. Semi-automatic machines require manual disassembly (taking 1-2 hours per mold change) and are suitable for applications with a single brick type or infrequent mold changes. Automatic machines often support "quick mold change systems" (30 minutes per mold change) and are suitable for applications requiring frequent brick type changes (e.g., handling multiple orders for municipal or home renovation projects).
Quality Standards: If products require high strength (e.g., compressive strength ≥MU10 for load-bearing hollow bricks) and a high pass rate (≥95%), or are intended for export or high-end projects, select an automatic machine (PLC control + precise batching, error ≤1%). If supplying to lower-demand applications, such as rural self-built houses, semi-automatic machines (with a pass rate of 85%-92%) can meet these requirements. Site Restrictions: Workshop Area and Layout
Semi-automatic machines: Require no conveying or palletizing systems. Each machine occupies approximately 20-30 square meters, making them suitable for smaller sites (e.g., rural workshops with workshops ≤ 100 square meters). However, a manual handling aisle (≥ 1.5 meters wide) and a brick stacking area (≥ 50 square meters) must be reserved.
Automatic machines: Require loading, batching, conveying, and palletizing systems. The entire production line occupies approximately 100-300 square meters (depending on production capacity). A linear layout (raw material area → mixing area → forming area → conveying area → palletizing area) is required to avoid cross-processing. Workshop height must also be considered (robotic palletizers require a floor height of ≥ 4.5 meters).

                                                                                                              WORKSHOP

                                                                                       APPLICATION CASE

Hot Tags: cement block making machine in brunei, China cement block making machine in brunei manufacturers, suppliers, factory, Blind brick machine, cement brick manufacturing machine, cement brick moulding machine, Diesel Generator, Full set of brick machine equipment, Sidewalk brick machine