Fully Automatic Brick Making Machine

Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of fully automatic brick making machine in China. If you're going to buy high quality fully automatic brick making machine, welcome to get pricelist and quotation from our factory. For price consultation, contact us.

 

 

 

Spring rain, rain is always more, and after a few months the arrival of summer, Meiyu season is also rainy. At this time, it is necessary to pay attention to the waterproof protection of the brick machine. If the motor of the cement brick machine is flooded, it needs to be removed, remove the motor rotor, dry the coil with 1 kilowatt light, and then assemble and use.

 

If the parts soaked in water rust, this time you can try to wipe with anti-rust oil to maintain, of course, this is an active part. Of course, if it is a fixed part, it can be polished and painted for protection at this time. Of course, at this time, it is also necessary to do insulation measures for the brick machine connection cable, check the sensor and the sensor connection line. If the hydraulic system of cement brick machine is flooded, what harm will there be?

 

If the hydraulic system water, then the water is likely to form a reaction with hydraulic oil, so it is easy to form mud, gum, acid, in addition, water may also suck out the additives in the oil, so naturally, the water will reduce the lubricity of the oil, is not conducive to the operation of the machine.

 

Water into the hydraulic system, bearing life is affected, will be reduced by about 35%-70%, in addition, the control valve is easy to bond because of the influence of water.

 

All in all, cement brick machines are particularly afraid of water. So in rainy weather, be sure to take protective measures.

 

 

 

Name and picture	Brick shape	SIZE	PCS/MOULD	PCS/8 HOURS
Air brick		390x190x190mm	6-10	8640-19200/pcs
block		2400x115x90mm	15-24	21600-46080/pcs
Standard brick		240x115x51mm	32-51	46080-97290/pcs
Coloured floor tile		200x100x60/mm	24-36	27300-59400/pcs

 

The Brick Machine Is Better To Manually Operate The Rod Or Fully Automatic

 

The current market share of the brick machine is still relatively large, and it has manual operation and automatic operation in operation. So which is better? Let's take a look.

 

In fact, everything has two sides, so we can't define which operation mode is perfect. So the evaluation criteria can not be so simple, so sloppy. Whether it is fully automatic or manual, in terms of service life is actually similar, the difference is not very obvious, so there is no obvious difference.

 

But we can evaluate it by the speed of the brick. Of course, the model of the brick machine is also different, in commenting on this point, we need to choose the same model. If the model is the same, then the time of each mold brick will be similar. Of course, the automatic can set the time, and the manual will require manual labor. However, the automatic also needs to be watched from time to time to avoid the situation.

 

In addition, from the point of view of the failure rate, the automatic brick machine has a high degree of automation, more sensors, and is relatively complex. If there is a problem with any of the sensors during operation, the machine may fail and stop running. Of course, if you choose a good brick machine, such a situation is relatively rare. In addition, the structure of the hand-operated rod structure is relatively simple, and the chance of failure will not be large.

 

In fact, no matter what kind of operation you choose, or to choose a good brick machine brand, you need to choose a reputable brand, choose a brand with a long history, such as read friends machinery since 1999 was founded, rapid development, quite well-known in the industry, may be a good choice for you!

 

 

What Are The Possible Causes Of Cement Brick Cracking

 

Factors of the foundation: the foundation is very important, when building cement bricks, if the foundation is relatively shallow, and the soil under the foundation has the problem of soft, this time the cement brick wall may burst under the action of gravity. So when digging the foundation, it is better to dig a little deeper;

 

Mortar use is uniform or uneven: With cement bricks to build walls, a common problem is that there is a need for uniform mortar to block the gaps between cement bricks. If the mortar is not used evenly, there are too many places, and too few places, it is easy to crack in time and the external environment. Because when building walls, we must not be lazy, can not cut corners, should be used or use;

 

Cement brick quality is good or not: Of course, there is another important reason, that is, the quality of cement bricks. If in the process of production, some people cut corners and reduce the proportion of cement, so that the content of cement is too low, then the quality of cement bricks will not be much better. Of course, the production of cement bricks, want cement bricks good quality, also need to have a good cement brick machine.

 

Langfang Nianpeng Machinery Manufacturing Co., Ltd. has long focused on the research and development, production and sales of environmentally friendly brick-making machinery. As a AAA credit enterprise, Nianpeng brick machine is oriented by customer needs, committed to building the most comprehensive and cost-effective brick machine, and maximize the use value of customer brick machine through professional services. Nian Friend machinery - production of good brick machine, worth looking forward to.

 

 

 

1. When the temperature is too low, especially in cold areas. After the production line is shut down, the following aspects should be done as soon as possible.

1) All hydraulic oil in the hydraulic pump station should be drained.

2) Because the internal circuit line of the PLC control cabinet is a high-precision equipment, it should be placed indoors to prevent low-temperature water vapor from freezing and causing short circuit after melting.

3) If the rubber hydraulic hose is used, the hose should be removed in time and placed indoors. Prevent freeze-thaw to reduce hose life, resulting in hose oil leakage. 2, when the production conditions, first of all to ensure that the raw materials are not frozen, the temperature is too low, raw materials can be appropriate to add antifreeze. In order not to affect the quality of the free brick, avoid stirring icing during production. First of all, do not stir a lot of raw materials, do "three fixed" quantitative mixing, quantitative feeding, quantitative cloth, mixing water use warm water. Hydraulic hose valves and joints should be properly insulated. When conditions are not available, be sure to stop production. Ensure the production and finished bricks are qualified

 

Nian Peng environmental protection brick machine equipment manufacturers have a variety of standard and comprehensive process programs for users to select, and many "tailored" programs have been successfully implemented, achieving a high-end customer base with a professional production of new energy-saving and environmental protection concrete products. For more than 20 years, we have focused on providing "practical, high-end and atmospheric" complete sets of brick making equipment for new building materials factories in China and even around the world

 

 

Automatic Brick Machine Advantages Highlights

 

With the development of science and technology, the current hydraulic cement brick machine equipment has also developed to the degree of automation. When it comes to automatic brick machines, naturally there are a series of advantages.

 

Automatic brick machine, automatic cycle operation, the probability of failure is relatively small, the safety performance is relatively high, some faults can also be self-diagnosis display;

 

Automatic brick machine can be used for multiple purposes. If the automatic brick machine is replaced with a different mold, a variety of brick types can be freely switched at this time. The mold thickening, fine grinding, special steel, high-frequency carburizing treatment, the mold box gusset plate is not welded, and the life is more lasting.

 

It can produce porous brick, road brick, grass brick, slope brick, hollow brick, etc., so it can be used in one machine;

 

Fabric is easier. The storage and sorting system is unique. In terms of fabric, the unique crank connecting rod structure and forced feeding device completely solve the problem of special-shaped brick fabric, and the secondary fabric can produce a variety of colored road bricks. Fabric is easier. This design is unique in terms of the storage and distribution system, which can reduce the uneven material density caused by external factors and ensure the accuracy of the feed.

 

Hydraulic, electrical control system design is reasonable, the components are well-known brands, with pressure protection devices, to ensure that the machine, electrical, hydraulic work safe and reliable;

 

Advanced control system. The effective combination of computer control, digital and displacement sensor technology makes the movements accurate and reliable. If something goes wrong in the long run, the computer system will also tell you. It can also assist in troubleshooting through remote control, video, telephone, etc.

 

In short, brick making machine, automatic production, can save manpower, improve the degree of automation, achieve large-scale production, to achieve output, scale, but also to promote the development of enterprises. With customer demand as the guide, Nianpeng Machinery is committed to building the most comprehensive and cost-effective brick machine, and maximize the use value of customer brick machine through professional services. Choose automatic brick machine, Nian Peng machinery for you!

 

Hot Tags: fully automatic brick making machine, China fully automatic brick making machine manufacturers, suppliers, factory, fully automatic brick machine, fully automatic brick making machine, fully automatic cement brick making machine, Fully Automatic Hollow Brick Equipment, I type brick machine, New type of brick making machine