Products
Uganda cement brick making machine equipment
The hollow structure of hollow blocks gives them a certain degree of elasticity and deformation ability. Under the action of external forces such as earthquakes, they can absorb and disperse energy, improve the seismic performance of buildings, and enhance the safety of buildings.
Features
Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of uganda cement brick making machine equipment in China. If you're going to buy high quality uganda cement brick making machine equipment, welcome to get pricelist and quotation from our factory. For price consultation, contact us.
1. The core components of a complete set of brick making equipment
Raw material handling system
- Crusher: used to crush raw materials (such as coal gangue, shale, construction waste, etc.).
- Mixer: Mix raw materials with water and binder (such as cement) to form a uniform material.
- Conveyor belt: Automatically transport raw materials to the molding machine.
Planetary mixer
Equipment features:
The vertical axis planetary mixer is driven by a planetary gear reducer driven by a mixing motor, which drives the reducer housing to revolve through the internal gears, and the planetary arm on the reducer rotates, so that the mixer can rotate 360 degrees without dead angles. The mixing arm and the mixing blades form a composite operation of revolution and rotation, forming a more complex mixing trajectory, achieving a more uniform and efficient mixing purpose, and at the same time, the material is discharged cleanly, and there will be no residual material at the bottom of the barrel.
Our brick machine
Block brick machine
Curing system
- Palletizer: stacks wet bricks to the curing area.
- Curing kiln/steam curing room: accelerates the curing of bricks through constant temperature and humidity (cement bricks need curing, and sintered bricks need kiln firing).
Brick machine production line
Palletizing and packaging equipment
-Automatic palletizer: stacks and packages finished bricks for easy transportation.
-Pallet/stretch film: protects the appearance of finished bricks.
Control system
- PLC automatic control: Fully automatic equipment needs to be equipped with an intelligent control system to achieve one-button operation, fault alarm, etc.
Environmental protection equipment
- Dust collector: to handle dust in the production process.
- Desulfurization device (sintered bricks must be equipped): to reduce waste gas pollution.
- Noise reduction facilities: to reduce equipment operation noise.
Packaging and delivery
| Selling Units: | Single item |
| Single package size: | 265X165X200 cm |
| Dimension | 5030x2620x3750mm |
| Single gross weight: | 3200.000 kg |
Starting a brick factory is a complex project involving policies, technology, capital and market. The following are key considerations, covering the entire process from preparation to operation, to help you avoid risks and increase your success rate:
, Policy and Regulatory Compliance
1. Approval Procedures
Business License: Register the enterprise and clarify the business scope.
Environmental Approval: Need to pass the environmental impact assessment report (focus on dust, exhaust gas, and noise pollution control plans).
Land Approval: Ensure that the land is industrial land and avoid occupying cultivated land or ecological protection areas.
Production License: Some areas require brick factories to apply for "New Wall Material Certification" or related qualifications.
Policy risks
Prohibition of using clay to make bricks: Many regions have banned the use of traditional clay sintered bricks and need to switch to environmentally friendly bricks.
(such as cement bricks, fly ash bricks, construction waste recycled bricks)
Carbon emission restrictions: sintered brick factories need to pay attention to carbon tax or emission quota policies.
Site selection and planning
1. Geographical location
Close to raw materials: such as shale, coal gangue, construction waste, etc., to reduce transportation costs.
Convenient transportation: convenient for raw material input and finished product output (close to national highways or logistics centers)
Water and electricity supply: brick factories consume a lot of water (mixing, maintenance) and have high electricity demand (equipment operation)
Output Parameters
2. Key factors for selection
1. Production requirements
- Output: Small factories (50,000-100,000 pieces/day) can choose semi-automatic lines; large factories (more than 200,000 pieces/day) need fully automatic lines.
- Brick type: Hollow bricks, permeable bricks, insulation blocks, etc. require special molds and pressure parameters.
4. Understand the manufacturer's after-sales service
Timely technical support and maintenance services can reduce equipment downtime.
Our Certificate
1. Only 2-3 people are needed to operate.
2. Minimum investment and minimum floor space.
3. Easy to maintain, service life can reach 15
Hot Tags: uganda cement brick making machine equipment, China uganda cement brick making machine equipment manufacturers, suppliers, factory, automatic hollow block machine, Brick marking machine, hollow brick making machine, Introduction of Special shaped Brick Machine, Roadside stone brick machine, Wall brick machine
You Might Also Like
Send Inquiry
