Block Moulding Machine

Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of block moulding machine in China. If you're going to buy high quality block moulding machine, welcome to get pricelist and quotation from our factory. For price consultation, contact us.

 

 

What Are The Problems That Should Be Paid Attention To After The Completion Of Block Moulding Machine?

 

As a fully automated production line, block moulding machine is favored by market users. After the completion of the hollow brick mechanism, we need to carry out a comprehensive cleaning and maintenance of the equipment and supporting systems.

 

After the end of the hollow brick mechanism, it is necessary to clean the equipment, clean the steel parts of the equipment, fixtures, raw materials, etc., scrub the external sheet metal parts, and first clean the control box and filter; Anti-fouling and waterproof work of automatic fire-free brick machine; Electrical equipment room should be well protected.

 

The full set of construction waste brick making equipment needs to be rust-proof on a daily basis, wipe the automatic hollow brick machine clean, and apply anti-rust agent; Scrub the cone holes of the main shaft bearing with a cloth and smooth grease; Turn off the switch power supply of the machine equipment to expand and turn off the power supply, then turn on and off the main power supply to expand and turn off the power supply.

 

The automatic hollow brick machine should be placed in a naturally ventilated, dry natural environment, and the working temperature should be in the middle of 0 to 45. In addition to operating according to the operating procedures, we should also pay attention to the working status of each part, pay attention to whether the link is loose, whether the travel switch is in place, etc., and deal with the problem in time. After the end of each shift, the equipment should be cleaned and wiped to prevent materials from condensing on the equipment and affecting the normal operation of the equipment.

 

When the complete set of construction waste brick making equipment is working, it is often checked whether the motor is overheating, and corresponding measures should be taken to implement cooling when overheating, and timely repair or replacement of problems should be found. Check regularly whether the triangle belt is loose and adjust it in time. Maintenance of the plate: the dirt on the surface of the plate should be removed frequently. The pallet should be stored in a dry and ventilated place when not in use. The pallet should be regularly repaired to prevent loosening, warping and other phenomena.

 

 

 

As we all know, now the block moulding machine has become the preferred equipment for brick making, which can not only provide us with higher strength brick free, but also bring higher returns to investors. Then we all know that the production process of free brick mainly relies on the pressing of hydraulic equipment, and before forming, the raw materials need to be mixed and stirred, and the most important thing is that a reasonable proportion is needed, so that it can be made into a very good quality cement brick. The use of raw materials is very wide, basically based on construction waste and industrial waste, which can help us rational use, but also reduce the cost of production. Today, let's talk about the raw material ratio of the production of automatic fire-free brick machine.

 

1. Cement brick machine on the raw material requirements are very harsh, the raw materials processed must be guaranteed to be below 3mm, otherwise it will cause damage to the brick machine mold, may lead to the deformation of the brick machine mold, thereby reducing the service life. In the selection of cement brick raw materials, we also need to pay attention to certain problems, that is, the choice of cement brick raw materials is also a certain note. If there is a problem in the choice of raw materials, it will also affect the environmental protection of cement bricks, and affect our later use.

 

2. Cement brick machine hydraulic pump station hydraulic oil purity requirements are very demanding, long-term in the dust environment, hydraulic pump station will inevitably enter impurities, which requires regular filtration of the pump station oil, or maintenance of hydraulic pump station.

 

3. The motor voltage requirements are also specified, 380v rated voltage voltage, the minimum production voltage can not be lower than 350V, if too low, it will cause machine failure, cause damage to the motor.

 

4. Especially some flammable raw materials, as well as some chemical waste, while corrosive can not be used, because these will bring damage to our human body, and the use of the process is likely to release a variety of harmful gases. In particular, some raw materials in the mixing process, after mixing with other materials, there may be some other toxic substances, which are needed to pay attention to in the production process of cement bricks. Some other chemicals may also cause damage to the machine, so we must strictly follow the material precautions to choose. In order to ensure the smooth production process of cement brick machine, the production of cement bricks in line with the standard.

 

 

Equipment parameter	Model JS500	Discharge capacity	500L
Overall power	52kw	Feed capacity	800L
Machine weight	8T	Theoretical yield	>25m³/h
Overall dimension	12250x1806x2970mm	Cycle time	72S
Executive standard	GB/T1071-2015	Discharge height	1.5 m

 

 

 

Cement brick machine as a widely used production equipment, suitable for all kinds of brick production. It not only has the characteristics of energy saving, but also the materials used in production are some wastes, which helps to reuse resources. The advantages of cement brick machine are obvious, but it is mechanical, and like all other production equipment, it will wear out, break down, and further affect production. This requires monitoring of cement brick machine failures during production and use. The following is a brief introduction to the three methods of monitoring the failure of cement brick machines.

 

One is through human sensory detection, which is a simple and economical method, but also frequently used, more dependent on production and use experience. Workers are required to see, smell, listen, touch and other ways to detect whether the machine is abnormal, such as whether there are cracks, whether the temperature is too high, and whether there is no odor. This is a direct detection method, but the detection data is not accurate enough to predict.

 

The second is the real-time detection of the temperature of the cement brick machine. The high temperature of production machinery is a kind of performance after the production of high-load machinery. The rise in temperature will have a serious impact on the cement brick machine. In production, real-time monitoring can be performed using liquid expansion sensors, bi metal sensors and resistance thermometers. With the help of the tool, it is possible to accurately measure whether the temperature of the cement brick machine is normal.

 

The third is to test the operation of the cement brick machine through the lubricating oil. Since the lubricating oil will circulate in the cement brick machine, after a long time, precipitates and particulate matter will be formed, and the particles in the lubricating oil will be sampled and tested to understand the internal condition of the cement brick machine.

 

The above are three methods to detect the operation of cement brick machines. Learning to understand and apply them can predict the operation of cement brick machine in advance, which is conducive to the smooth progress of production.

 

 

Hot Tags: block moulding machine, China block moulding machine manufacturers, suppliers, factory, A complete book of brick making machines, block moulding machine, concrete block laying machine, energy saving Roadside stone brick machine equipment, Multifunctional fully automatic brick making machine, Roadside Stone colored Brick Machine