Hollow Block Making Machine

Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of hollow block making machine in China. If you're going to buy high quality hollow block making machine, welcome to get pricelist and quotation from our factory. For price consultation, contact us.

 

 

Hollow Block Making Machine Daily Operation Rules And Precautions

 

The user who buys the cement brick machine in the daily production and use, does not know much about the equipment, and does not operate according to the instruction manual given by the brick machine manufacturer, there will certainly be some minor failures of this kind, which not only affects the production, but also causes some damage to the equipment itself. Therefore, in order to make the cement brick machine run efficiently without problems, it is very necessary to master the daily operating procedures and precautions of the hollow block making machine:

 

1. In order to correctly use and maintain the operation of the cement brick machine equipment, the maintenance personnel must understand the performance and characteristics of the equipment in detail, do not operate freely, so as to avoid injury and damage to the parts.

2. Before the installation and use of cement brick machine, users must carefully read this manual. If in doubt, please contact our factory in time for consultation.

3. During the inspection and maintenance, the main power supply should be cut off and the warning sign should be hung.

4. The moving parts of the equipment should not be approached by non-staff members when working.

5. Fully automatic cycle operation can be performed when all components are in place.

6. Non-computer control cabinet operators shall not press the button at will to avoid injury and damage to the machin

7. After each shift, the electrical switch should be placed in the "power off" or "stop" position.

8. The cement in the hopper should be used up in time to prevent solidification.

9. The machine electrical should be reliably grounded in order to ensure safety.

10. The selection of hard aggregate should be adapted to the holes on the side of the mold box, and hard foreign matter can not be mixed into the material to prevent damage to the cement brick machine mold.

11. At the end of the molding, if the material is not enough, the indenter should not be pressed down to prevent damage to the indenter cylinder and the indenter synchronization structure, resulting in indenter asynchronization.

12. The concrete solidified on the pallet of the brick machine should be cleaned up in time.

13 Vibration molding time should be strictly controlled, molding time is long, the pressure head can not be compressed, then adjust the amount of fabric.

14. Check whether the travel switch of cement brick machine equipment is in place at any time. If it is loose, adjust it in time and tighten it. The distance between the end of the travel switch and the induction block is 5-8mm to prevent collision.

15. The condenser on the hydraulic station must be used in summer, otherwise the oil heats up, affecting the normal use, and the oil should be replenated and replaced in time. The filter element should be replaced in time according to the instructions of the flood controller, otherwise the hydraulic system will fail.

16. Replace the rubber scraper on the feed hopper in time, and adjust the gap, otherwise the material will leak and the pressure head will stick.

17. Tighten all bolts before use.

18. The vibration platform, the upper plane of the plate feeding machine and the plane of the brick feeding machine must be flat, otherwise the plate of the brick machine can not be smoothly transmitted, and the block can not be pushed out or cracked.

19. All lubricating parts should be lubricated before each shift.

20. Clean up after each shift.

 

Whether it is for enterprises or users in the machinery industry, the safety of the machine is very important, and it is directly related to the personal safety of the staff. Especially for large mechanical equipment, operators must comprehensively learn the main points of operation and strengthen safety awareness before use.

 

 

 

Equipment parameter	Model JS500	Discharge capacity	500L
Overall power	52kw	Feed capacity	800L
Machine weight	8T	Theoretical yield	>25m³/h
Overall dimension	12250x1806x2970mm	Cycle time	72S
Executive standard	GB/T1071-2015	Discharge height	1.5 m

 

 

With the rapid development of economy, people's pace of life is quickening and they want to improve efficiency. For the brick machine equipment, since entering people's sight, the brick machine is no longer a strange equipment, with its environmentally friendly production mode, durable characteristics, more and more popular. If the brick making machine is further improved in brick quality and production efficiency, it will be more welcomed by investors.

 

Enterprises want to develop, we should put the vision of the long-term, domestic brick machine enterprises to achieve more long-term development, we must do a good job of product quality, grasp the market demand, product innovation, improve after-sales service.

China's brick machine industry has been developing continuously in recent years, and now, under the influence of environmental problems and environmental protection policies, brick free is becoming more and more popular, and brick free machine is becoming more and more concerned.

 

Trend hot spot one: waste waste reuse

 

In today's increasingly scarce resources, waste waste piled up anywhere is a great waste of resources, but also caused pollution to the environment. Resource recycling has become an inevitable development trend, many free brick factories began to use a variety of waste waste slag production free brick, so that not only can save raw material costs, but also can turn waste into treasure, so that "waste, waste slag" play waste heat. However, the current free brick machine market can adapt to the production of ordinary raw materials free brick machine is not difficult to find. Adapt to a variety of waste waste production of brick machine is not many, many brick machine enterprises are in the direction of scrap brick development, if can adapt to a variety of waste production and good effect, will be welcomed by the market.

 

Trend hot spot two: clay bricks are eliminated

 

With the more and more serious environmental pollution, the land that human beings depend on for survival has been seriously damaged, environmental protection has become a problem that all countries in the world must solve together, and it is urgent. Clay bricks have a long history, because the need to make bricks from soil, coal sintering, low-altitude emissions, pollution of the environment, waste of resources, therefore, China has introduced a number of environmental protection policies, control and eliminate clay brick kilns. Brick kiln has been unable to meet the needs of the development of The Times, clay bricks are replaced is the trend of The Times, new building materials - free brick with its environmentally friendly production process, in the near future will replace the market of clay bricks.

 

Trend hot spot three: green development is concerned

 

With the continuous deterioration of the environment, wild, not environmentally friendly production methods have been unable to keep up with the pace of green development, for building materials companies, it is imperative to take the road of green environmental protection. A wide range of materials, can use a variety of waste, do not need sintering, energy saving and environmental protection, in line with the development direction of green environmental protection.

 

Trend hot four: Product quality should be paid attention to

 

Solid and reliable free brick machine, will be welcomed by users, free brick mechanism products - the quality of free brick must also be paid attention to, clay bricks are popular because people trust in their quality, free brick to occupy the market must work hard in quality. Reasonable proportion of raw materials, the correct production process, with high pressure free brick machine can be pressed out of high quality free brick, the quality of free brick will be trusted and welcomed by customers.

 

Trend hot five: automated and efficient production

 

With the rapid development of the economy, people's pursuit of efficiency and automation is getting higher and higher, automatic production of brick free machine, not only can reduce the influence of human factors, improve product yield, ensure product quality, improve product competitiveness, further reduce the comprehensive cost of enterprises, the development of automation will also be the future direction of development of brick free machine industry.

 

Turning waste into treasure, green production, reliable quality, free brick quality clearance, automatic operation, labor saving free brick machine into the market, both to meet customer needs, but also in line with the market development trend, must be "money" considerable.

 

 

 

Hot Tags: hollow block making machine, China hollow block making machine manufacturers, suppliers, factory, A complete book of brick making machines, block moulding machine, energy saving Roadside stone brick machine equipment, High efficiency Roadside stone brick machine equipment, hollow block making machine, Multifunctional fully automatic brick making machine