Products
Brazil Hollow Cement Block Machine
The Cement Interlocking Brick Making Machine and Paving Stone Making Machine are essential for construction. They efficiently produce high - quality interlocking bricks and paving stones. With advanced technology, they ensure stable performance, meet various construction needs, and are popular in building projects and urban road construction.
Features
Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of brazil hollow cement block machine in China. If you're going to buy high quality brazil hollow cement block machine, welcome to get pricelist and quotation from our factory. For price consultation, contact us.
How long is the replacement cycle of the wearing parts of concrete brick making machines?
The replacement cycle of wearing parts of concrete brick making machines is affected by factors such as equipment quality, frequency of use, production environment, and maintenance. The following are the approximate replacement cycles of some common wearing parts:
Mold
Ordinary solid brick mold: If the frequency of use is high, more than 5,000 bricks are produced per day, and the production environment is relatively harsh, the mold may be obviously worn after 3 to 6 months of use and needs to be replaced; if the frequency of use is low, the maintenance is proper, and the production environment is good, it can be used for 6 to 12 months or even longer.
Complex brick molds: such as hollow bricks and porous brick molds, due to their complex structure, under frequent use, some severely worn parts may need to be checked and replaced every 2 to 4 months; if it is used intermittently, it can be replaced in 4 to 8 months.
Vibrator
Small vibrator: Generally used in small brick-making machines. In the case of continuous operation, the motor and vibration shaft of the vibrator may fail or degrade in performance after 6 to 10 months of use, and need to be repaired or replaced; if it is intermittent operation and the frequency of use is low, it can be replaced in 10 to 18 months.
Large vibrator: Applied to large brick-making machines, it bears a greater load. If the working hours are long every day, the performance of the vibrator may need to be checked every 4 to 8 months, and the parts with severe wear may need to be replaced; if the frequency of use is not high, it can be replaced in 8 to 12 months.
Seals
Hydraulic system seals: Due to the high pressure of the hydraulic system, seals are prone to aging and wear. Under normal use, some seals need to be checked and replaced every 6 to 12 months; if the hydraulic system works frequently and the pressure fluctuates greatly, it may need to be replaced every 3 to 6 months.
Seals in other parts: For example, seals in mixers, conveyor belts, etc., the replacement cycle generally varies from 3 to 12 months depending on the use environment and frequency. When used in dusty and humid environments, the wear of seals will accelerate and may need to be replaced every 3 to 6 months; in relatively clean and dry environments, they can be replaced every 6 to 12 months.
Belts and chains
Belts: If the belt drive system of the brick making machine has a large load and a long daily running time, the belt may show obvious wear, elongation or aging cracks after 3 to 6 months of use and needs to be replaced; if the load is small and the frequency of use is low, it can be replaced every 6 to 12 months.
Chain: Chain wears relatively slowly, but under high load and frequent start-stop working conditions, the chain wear may need to be checked every 4 to 8 months, and the severely worn chain links may need to be replaced or replaced as a whole; under normal working conditions, it can be replaced every 6 to 12 months.
Bearing
Mixer bearing: The mixer will generate large torque and vibration during the mixing process, and the bearing will bear a large load. If it works continuously every day, the mixer bearing may be worn after 4 to 8 months and need to be replaced; if it works intermittently, it can be replaced in 6 to 12 months.
Conveyor belt bearing: The load on the conveyor belt bearing is relatively small, but if the conveyed material is heavy and the running time is long, it may need to be replaced in 6 to 10 months; if the conveyed material is light and the frequency of use is low, it can be replaced in 8 to 12 months.
Hot Tags: brazil hollow cement block machine, China brazil hollow cement block machine manufacturers, suppliers, factory, A complete book of brick making machines, cement block forming machine, concrete block laying machine, energy saving Roadside stone brick machine equipment, hollow block making machine, New Brick Making Machine
You Might Also Like
Send Inquiry
