Products
block machine in Canada
Hollow block machine is a kind of equipment specially used for producing concrete blocks and other brick products. Its main feature is that it does not need to be fired during the production process. It presses various raw materials into shapes through hydraulic forming technology or mechanical vibration to produce bricks of various shapes such as standard bricks, hollow bricks, porous bricks, road tiles, curb bricks, etc.
Features
Langfang Nianpeng Mechanical Equipment Processing Co., Ltd. is one of the most reliable manufacturers and suppliers of block machine in canada in China. If you're going to buy high quality block machine in canada, welcome to get pricelist and quotation from our factory. For price consultation, contact us.
The output of a block machine is also not a fixed value. Its actual production efficiency is influenced by multiple factors, including equipment performance, raw materials, operational management, and environmental conditions. While similar to the 4-15 model, some influencing factors may differ slightly due to differences in equipment specifications (such as mold capacity and molding cycle). The following is a detailed analysis:
1. Equipment Performance and Core Configuration
Molding Cycle Stability
The molding cycle is the critical time parameter required for the machine to complete each cycle of material placement, pressing, and demolding (the molding cycle for a 6-15 model is typically 15-20 seconds, though some high-end models can be shortened to 12-15 seconds). It directly determines the unit-time output:
If the hydraulic system pressure is stable and the vibration motor power is sufficient (usually with a high-power vibrator), a short cycle (e.g., 15 seconds per cycle) can be maintained, achieving over 240 molding cycles per hour.
If hydraulic components are aged or leaking, the vibration frequency is insufficient, or the mold positioning accuracy is poor, the cycle time will be extended (e.g., over 20 seconds), reducing unit-time output by 15%-30%. Mold Specifications and Platen Capacity
The mold capacity of a 6-15 model brick machine is typically larger than that of a 4-15 model (the "6" represents the number of rows or holes that can be produced per platen). The difference in the number of blocks per platen for different brick types directly affects the single-cycle output:
Standard bricks (240×115×53mm) can hold 30-40 blocks per platen, while hollow blocks (390×190×190mm) can hold 6-8 blocks per platen, resulting in higher single-cycle output than the 4-15 model.
Mold wear and deformation, misalignment during installation, or incompatibility with the equipment can lead to mold jamming, material leakage, and brick fragments, requiring frequent downtime for cleaning and adjustment, reducing effective production time.
Hot Tags: block machine in canada, China block machine in canada manufacturers, suppliers, factory, fully automatic cement brick machine, fully automatic cement brick making machine, Fully Automatic Hollow Brick Equipment, Intelligent brick machine, New type of brick making machine, Water permeating brick machine equipment
You Might Also Like
Send Inquiry
