Large Cement Brick Making Machine

Large cement brick making machine

Winter maintenance of cement free brick machine

Entering the winter, it is the off-season of the production of the brick machine, because the temperature is too low, many have no room

Inside the maintenance facilities of the manufacturers are unable to produce. In this case, the protection of the brick machine

Maintenance is important, just like car maintenance, to do something routine and necessary on a regular basis

Maintenance is good for extending the service life of the equipment and keeping the equipment in good condition

At present, we share with you the maintenance experience of our source brick machine.

1: Close the inlet and outlet of the cooler, and open the waterproof bolt of the cooler with a pipe wrench

2: Use an air pump to pump the water intake so that the water can be discharged clean

3: Tighten the drain bolt of the cooler, close the inlet and outlet, and wrap the cooler with felt cloth

4: Clean and lubricate the transmission part, clean and lubricate the gear, bearing, guide rod, etc., and seal the butter surface.

5: Sort out the electrical parts. Clear dust and moisture protection.

6: oil pump and hydraulic station maintenance, surface dust cleaning, and cover the hydraulic station with tarpaulin.

Matters needing attention

7: When not in use. Check equipment regularly and solve problems in time. Note that the water of the cooler must be discharged clean, and the hydraulic station must be covered with tarpaulin. The transmission parts should be lubricated and sealed with butter

Hollow brick making machine is specialized in the production of building hollow blocks, hollow bricks, multi-row hole bricks, etc., suitable for the filling of frame buildings, building buildings, factories and other walls.

Hollow brick has a light weight, hollow has a certain energy-saving effect, promote the use of bricks, according to the needs of customers to produce different specifications of hollow bricks, blocks, etc., the use of PLC intelligent control, and set manual, automatic operation, according to the density of different materials, strength to achieve human-machine dialogue, is a set of machine, electrical, hydraulic in one of the advanced production line.

Hollow brick making machine is specialized in the production of ceramic hollow block, coal ash ceramic hollow brick and other ceramic insulation brick block professional brick making machine equipment.

In the production of up and down pressure, strong vibration, very suitable for the production of standard bricks, its strength is higher than clay bricks, after the replacement of different molds, can also produce a variety of blocks. QMJ-A fixed hollow brick machine production blocks can be widely used: slag, sand, gravel, aluminum red slag, electrolytic copper slag, coal gangue, construction waste, fly ash, volcanic slag and other raw materials, raw materials are rich, everywhere, investment and construction, extremely convenient

Hot Tags: large cement brick making machine, China large cement brick making machine manufacturers, suppliers, factory