Concrete Brick Making Machinein Turkmenistan

III. Additional Maintenance Under Special Operating Conditions

If the production environment is harsh (such as high temperature, high dust, or humidity), maintenance frequency may need to be increased:

High-dust environments (e.g., raw materials with high sand content): Clean the air filters (hydraulic system and motor intake filters) daily and replace them weekly. Install a dust cover at the equipment's feed inlet to reduce dust intrusion.

High-temperature environments (e.g., outdoor production in summer): Install a cooling fan or cooler outside the hydraulic oil tank to control the oil temperature to ≤55°C. Avoid continuous operation during the midday heat; instead, split production into time periods (e.g., 6 hours in the morning and 6 hours in the evening).

Humid environments (e.g., rainy season in southern China): Remove moisture with dry compressed air before starting the machine daily. Place a moisture-proof agent (such as silica gel desiccant, which should be replaced monthly) in the electrical control cabinet. Raise the bottom of the machine by 10-15cm to prevent water from soaking the machine. IV. Maintenance Taboos and Precautions
Prohibited Illegal Operations: During maintenance, power and hydraulic power must be disconnected. A "Maintenance in Progress, Do Not Start" warning sign must be displayed prominently on the equipment to prevent accidental activation. Do not disassemble molds or hydraulic lines while the equipment is operating.
Accessory Selection Guidelines: Original parts (such as seals, filter elements, and molds) are preferred. Aftermarket parts may have dimensional deviations and can easily cause equipment failure (for example, aftermarket hydraulic filters may have insufficient filtration accuracy, causing wear on the hydraulic pump).
Maintenance Logs: Create a "Hollow Brick Machine Maintenance Log" to record the time, location, operation details, and part model of each maintenance session. This will facilitate equipment status tracking and predict the replacement cycle for wearing parts.
Emergency Measures: If a major fault is detected during maintenance (such as abnormal noise from the hydraulic pump or smoke from the motor), immediately shut down the machine and contact the manufacturer's after-sales service. (Avoid disassembling core components yourself, which may exacerbate the problem.) Through systematic maintenance, the service life of the hollow brick machine can be extended to 5-8 years (only 3-4 years without standardized maintenance), while reducing the failure rate (the failure rate can be reduced by more than 60% after standardized maintenance), ensuring continuous and stable production.

The environmental protection advantage is a prominent highlight of this brick-making machine. It uses waste materials such as fly ash, slag, mineral slag, construction waste, and industrial waste residue as production raw materials, which greatly improves the recycling rate of waste and achieves the goal of energy conservation and waste utilization. During the production process, the advanced hydraulic transmission technology ensures that no waste gas or waste is emitted, truly achieving zero-pollution production. This is in line with the current global environmental protection concept and contributes to environmental protection. Moreover, this production method reduces the dependence on natural resources and saves a large amount of land resources, making contributions to sustainable development.