Material storage and distribution device
Adopting a closed belt conveyor, strictly controlling the storage capacity of small materials, achieving instant use and preventing concrete from liquefying prematurely due to aftershocks, ensuring product strength.
Unique vibration form: Utilizing computer control of hydraulic system flow and pressure to achieve vertical synchronous vibration, frequency conversion, and braking; The advanced compression vibration form of the mold allows the concrete to fully liquefy and exhaust within 2-3 seconds. Utilize excess oil during pressurization to convert it into shock force, thereby basically eliminating energy consumption.
Reasonable vibration distribution: Lock the mold box onto the vibration table through the release oil cylinder, and the mold table vibrates together; A dedicated vibrator is installed on the pressure head to increase the vibration speed. This vibration form causes rapid liquefaction and exhaust of concrete, resulting in high-density and high-strength products. Various high-quality load-bearing or non load-bearing products can be produced by utilizing a large proportion of various types of waste ash, slag, slag, coal mine stone, volcanic ash, coal ash, stone chips, and construction waste.
Unique cutting and arch breaking devices enable materials to be quickly and evenly fed into the mold box; Special dual end composite output vibration technology and reasonable arrangement of vibrators ensure uniform distribution of excitation force within the vibration table. So as to ensure the consistency of product weight and strength.
We have an annual production capacity of 80000 cubic meters of standard bricks and 45 million standard bricks. Classic model: Its host is equipped with a carpet mechanical reciprocating oscillation mechanism fabric device, which solves the fabric problem in the industry and greatly improves its productivity. The main vibrator adopts a high-speed heavy-duty structure, which doubles its lifespan. The configurable return plate system is equipped with a compensation system, which is equivalent to a storage doubling mechanism, and can increase productivity by at least 10%.
Characteristics Of Type Block Machine
1. The operating system adopts Japanese Mitsubishi programmable controller PLC and human-machine interface touch screen control, equipped with data input device, safety logic control, and fault diagnosis system, which can achieve ideal human-machine dialogue.
2. Perform manual, semi-automatic, and fully automatic mode operations. The parameters of each actuator can be set freely. Can ensure the quality and efficiency of the product. The 6-15 non fired brick machine adopts a heavy-duty structural design.
3. Made using high-strength steel through special welding techniques. It can ensure good rigidity, self weight, and no resonance with the excitation system of the body. Can extend the service life of the machine.
4. Three cylinder pressurization, with uniform force distribution during the concrete forming process, solves the shortcomings of traditional hydraulic block machines that do not apply pressure due to vibration. It achieves the characteristics of high pressure, large number of formed blocks, high compressive and flexural strength of cement blocks, and low support plate.
